Lab Rubber Two Roll Mill, Rubber Mixing Mill

• After-sales Service: Dispatch Engineer to Factory
• Warranty: 3 Years
• Control Type: PLC
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: XK-160/250/300/360/400/450/560/660
• Automatic Grade: Automatic
• Power Source: Mechanical
• Type: Open Mixing Mill
• Roller: Cold Hard Alloy Steel
• Bush: Nylon/Copper/Bearing
• Gearbox: Bull / Planet/ Hardened Teeth
• Gap Adjustment: Manual / Motorized
• Lubrication: Grease / Thin Oil
• Transport Package: Container in Bulk
• Specification: XK-160/250/300/360/400/450/560/660
• Trademark: JUCAI
• Origin: China
• HS Code: 8477800000
• Production Capacity: 300 Sets Per Month
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 1100.000kg

Product Description

Lab Rubber Two Roll Mill ,Rubber Mixing Mill
 

Supply Range

Model : xk-160 ,xk-250,xk-300,xk-360,xk-400,xk-450,xk-560,xk-660

Gearbox : bull gearbox , planet gearbox , hardened teeth gearbox 

transmission system: nylon bush , copper bush , roller ball bearing bush 

gap adjustment : manual adjustment , motorized adjustment 

lurication : manual type , automatic type , grease oil , thin oil 

if you have any requirement for machine configuration , we can customize 

 

Application

This machine mainly consists of rollers , hardened teeth gearbox (except XK-160), electrical cabinet ,nylon bush transmission device , main motor , etc . It is widely used for mixing , warming and sheeting rubber , etc .
 

Machine Display

Machine Feature

1.The roller is made of alloy chilled cast iron .Their surfance are hard and wear resistance . Its hardness of surface is HRC68-75

2.The end of rollers are supported by the roller ball bearing bush .It has the advantages of running smoothy ,energy saving , low noise and long life

3.The roll gap adjustment is manual control type . It is simple for operation

4.The machine is equipped with overloading protection device , in order to protect the main parts from being damanged

5.The machine adopts the single drive type transmission structure . It adopts the nylon pin coupling to prevent main parts from being damanged due to the overload of transmission part

6.The base is integral type , the transmission mode is of closed transmission . so it is safe and easy for use

7.The machine is installed with the emergency button and pulling rope as the safety device

8.This machine are installed with four sets lubrication device and suitable for grease lubrication

9.The machine adopts the PLC control cabinet , the machine will be suitable for your local industrial voltage and frequency

 

Product Parameters

model/	XLB-D0.25MN	XLB-D0.5MN	XLB-D0.8MN	XLB-D1.0MN	XLB-D1.0MN
Mold closing force	0.25	0.5	0.8	1.0	1.0
Heating plate size	300*300 350*350	400*400 450*450 500*500	500*500 600*600	450*450	550*550
Working layer	1 / 2	1/ 2	1 / 2	1 / 2	1 / 2
Plate clearance	200	200	200	200	200
Plunger stroke	200/400	200/400	200/400	200 /400	200 /400
Plunger diameter	152	200	250	285	300
Unit area pressure of heating plate (kg/cm2)	27.7 20.4	31.2 24.6	32 22.2	49.3	33
Heating	Electrical	Electrical	Electrical	Electrical	Electrical
Heating temperature	300	300	300	300	300
Control	automatic	automatic	automatic	automatic	automatic
Optional control way	Semi-automatic/ common automatic /PLC text type/ PLC+ touching screen
Gross weight	900	1200/1350/1450	1550/1750	2200	2300

model	XLB-D1.0MN	XLB-D1.2 MN	XLB-D1.6 MN	XLB-D2.0MN	XLB-D2.5MN
Mold closing force	1.0	1.2	1.6 MN	2.0	2.5
Heating plate size	600*600	700*700	750*750	800*800	1000*1000
Working layer	1 / 2	1/ 2	1 / 2	1 / 2	1 / 2
Plate clearance	200	200	200	200	200
Plunger stroke	200/400	200/400	200/400	200 /400	200 /400
Plunger diameter	300	320	360	400	450
Unit area pressure of heating plate (kg/cm2)	27.7	24.5	25	31.25	25
Heating	Electrical	Electrical	Electrical	Electrical	Electrical
Heating temperature	300	300	300	300	300
Control	automatic	automatic	automatic	automatic	automatic
Optional control way	Semi-automatic/ common automatic /PLC text type/ PLC+ touching screen

 

Company Profile

1.Are your company a trading one or a factory?

Factory + trade (integration), 30 years focusing on rubber machine design and production .
OEM is also acceptable for us.

2.How to choose the most suitable products?

Our professional team will give you the best suggestion as long as you tell us what kind of product you need to do and the required specification.

3.Do you accept customization service?

Yes, of course, we can not only offer standard machines, but also customized machines according to your request. Don't hesitate to tell us your requirement, we will try our best to meet your needs.

4.How about your warranty?

Generally, our warranty is one year. Within the warranty period, we can offer technique support and part parts change,
necessarily, our engineers may go to your place for better service.

5.How about the packing for machine, is it safely protected during transportation?

Our machine is packed by standard export wooden box, it won't be damaged. We've delivered many testing machines abroad by sea or by air without damage.

6.What is the order process?

Inquiry - quotation - communication - order confirming - deposit payment - production - testing and debugging - balance payment -packing - delivery - customer receiving - after service.